Use

 The CJX2 - F series exchange contact device (hereafter refers to as contact device) to be suitable to exchanges 50Hz (60Hz) the fixed working voltage to 1000V, in the electric current 115-800A electric circuit, puts through for the long-distance range and divides breaks the electric circuit and the frequent initiation control motor. The contact device also may conveniently install the assistance contact composition or the air time delay head, and may with the suitable hot overload relay synthesis electromagnetism starter, protect possibly occurs has operated the load electric circuit.

Working condition and installation condition

4.1 ambient air temperature -5℃～+40℃;
4.2 altitude under 2000m;
4.3 ether condition : ether relative humidity ambient temperature is +40℃ under 50%, when in low temperature can allow relative temperature, for example 20℃ to 90%;
4.4 To because the temperature change occasionally produces congeals the dew to be supposed to take the special measure;
4.5 The product should install the use in the not remarkable undulation and the vibration place;
4.6 installation manner : bolt installation;
4.7 installation condition : installation surface and upright surface slant not bigger than ±5°;
4.8 installation sort is “installation sort Ⅲ”;
4.9 pollution grade is “pollution grade 3” .

Attention

        When in using, contactor’s sliver point pass some times get through and breaking operation, sliver point surface come out black, this don’t effect normal use, do not polish, or you will release use life .
       If control voltage not in table 2 regulate area (85%~110%Us), can get in tough with us.

Order notice

When you order, please notice that:
Contactor Type and name ,
Control loop voltage and Frequency ,
Order quantity
          for example : CJX2-F115 AC contactor 220V 50Hz 10desk
Product loop is easy broken parts, can make a order alone,
         for example : LX1-F185/110 10件